Five Quarters Bundle

home *** CD-ROM | disk | FTP | other *** search

/ Five Quarters Bundle / Edge: Five Quarters Bundle.iso / gamerunr / qsetup.qip / QHINTS.DOC < prev next >

Wrap

Text File | 1995-12-30 | 28.0 KB | 591 lines

■τQEMM Hints and Tips 1 = QEMM and Microsoft Windows 1ΣQEMM AND MICRO 2 = QEMM and DESQview or DESQview/X 2ΣQEMM AND DESQV 3 = QEMM with DR DOS 6 or Novell DOS 7 3ΣQEMM WITH DR DOS 4 = QEMM and disk compressors (e.g., Stacker, SuperStor) 4ΣQEMM AND DISK 5 = QEMM and bus-mastering devices 5ΣQEMM AND BUS-MAS 6 = QEMM and the EMS page frame 6ΣQEMM AND THE EMS 7 = QEMM's Stealth ROM Feature 7ΣQEMM'S STEALTH ROM 8 = QEMM's Optimize Program 8ΣQEMM'S OPTIMIZE PRO R = View QEMM's READ.ME file for late-breaking information R»READ.ME T = View QEMM technical notes TΣTECHNOTE INDEX ■Φ--- Type the number of the item you want --- ■Φor press PgDn for more selections ■τQEMM Hints and Tips (page 2) 1 = Undoing an Optimize 1ΣUNDOING 2 = The Manifest program 2ΣTHE MANIFEST 3 = VIDRAM - extending memory for text-based programs 3ΣEXTENDING MEMORY 4 = Tips on freeing more conventional memory 4ΣTIPS ON FREEING 5 = QEMM's new parameter names 5ΣNAMES 6 = Booting without QEMM 6ΣBOOTING WITHOUT 7 = Contacting Quarterdeck technical support 7ΣQUARTERDECK TECHNICAL 8 = Switching between MS-DOS 6's memory manager and QEMM 8ΣSWITCHING ■Φ--- Type the number of the item you want --- ■Φor press PgUp for more selections ■τQEMM and Microsoft Windows QEMM is fully compatible with Microsoft Windows. QEMM automatically provides 8K-24K more memory for running DOS programs inside Windows 386 enhanced mode. Also, you can use QEMM's VIDRAM feature to extend the amount of memory available to DOS text-based programs running in Windows by up to 96K (see Chapter 6 in the QEMM Reference Manual.) If you install Windows after installing QEMM, be sure to run QSETUP and select "Specify Microsoft Windows directory." This selection will add the line /SystemROMBreakPoint=false to your SYSTEM.INI file, a Windows configuration file, to ensure that Windows runs optimally with QEMM. ■τQEMM and Microsoft Windows (Continued) In the unlikely event that you experience problems with Windows after installing QEMM, see the text file WINFLOW.TEC in the \QEMM\TECHNOTE directory. You can view technotes with QEMM Setup by selecting the technotes option at the main menu. ■τQEMM and DESQview or DESQview/X If you are using DESQview or DESQview/X, you can increase the amount of memory in each window by using the Stealth ROM feature. To find out if you are using Stealth ROM, select "Review or change QEMM parameters" from the main QEMM Setup menu. Then look for the selection "Stealth system and video ROMs." If you see the word "Mapping" or "Frame" at the end of that line, Stealth ROM is already enabled. If you see the word "Off," you can enable Stealth ROM by typing "S" or hitting the ENTER key, then following the on-screen instructions. Online Help will tell you more about the Mapping and Frame methods of Stealth ROM. If you have DOS version 5 or 6, QEMM's installation places the command DOS=HIGH in your CONFIG.SYS file (if it is not already ■τQEMM and DESQview or DESQview/X (Continued) there). This is a DOS command that loads part of DOS and DOS BUFFERS into the HMA (the first 64K of memory above 1MB). You may be able to increase the amount of memory in DESQview or DESQview/X windows by deleting DOS=HIGH from CONFIG.SYS. To find out, first run Memory Status from inside DESQview or DESQview/X. Make a note of the figure in the bottom right under "Largest Available Expanded Memory." Then delete DOS=HIGH from your CONFIG.SYS and run Optimize by typing OPTIMIZE at the DOS prompt. When Optimize completes, run Memory Status from inside DESQview or DESQview/X and check "Largest Available Expanded Memory" again. If it is a larger number than before, you are better off ■τQEMM and DESQview or DESQview/X (Continued) without DOS=HIGH. Otherwise, add the line DOS=HIGH back to CONFIG.SYS and re-run Optimize. For more suggestions on increasing the size of your DESQview or DESQview/X windows, see the Technical Note "Maximizing Conventional Memory" (MAXMEM.TEC) in the QEMM\TECHNOTE directory. You can use QSETUP to view this technote; from the main menu, select "View QEMM hints, technotes and READ.ME," then "View QEMM technical notes." ■τQEMM with DR DOS 6 or Novell DOS DOS-Up is fully compatible with Novell DOS 7 and DR-DOS 5 and 6. For complete information on using QEMM with DR-DOS 6 or Novell DOS 7, see the text file (NW&DRDOS.TEC) in the \QEMM\TECHNOTE directory. You can use QSETUP to view this technote; from the main menu choose "View QEMM hints, technotes and READ.ME," then "View QEMM technical notes." ■τ QEMM and Disk Compression Software ■τ(e.g., Stacker, Superstor) QEMM is fully compatible with current disk compression software, and includes special features for both Stacker and MS-DOS's DoubleSpace and DriveSpace. QEMM's Stealth D*Space feature reduces the memory overhead of DoubleSpace or DriveSpace to as little as 3K. If you are using MS-DOS disk compression, this feature will be displayed on the QSETUP main menu; choose "Enable or disable Stealth D*Space," then Yes to enable the feature. Adding the /QD parameter to the STACKER.INI file can reduce Stacker's overhead to as little as 10K. Please refer to the technotes listed below for details. ■τUsing QEMM with Disk Compression Software (Continued) If you are using older disk compression software, you may need to take special steps to use QEMM. We have provided technical bulletins (technotes) covering Stacker, SuperStor, and XtraDrive in the \QEMM\TECHNOTE directory. You can use QSETUP to view these technotes; from the main menu choose "View QEMM hints, technotes and READ.ME," then "View QEMM technical notes." ■ΦStacker ■µ - If you have Stacker versions from 2.01 through 4.0, no special steps are generally required; however, we do suggest you read the technote STACKER.TEC before running Optimize. ■ΦSuperStor ■µ - Before running Optimize, read SSTOR.TEC. ■τUsing QEMM with Disk Compression Software (Continued) ■ΦXtraDrive ■µ - Please see the technote XTRADRV.TEC. ■ΦDoubleSpace or DriveSpace ■µ - If you are using MS-DOS 6's DoubleSpace or DriveSpace, you can save 31K-49K of memory by using QEMM's Stealth D*Space feature to relocate the DoubleSpace or DriveSpace device driver in expanded memory. See Chapter 5 of the QEMM Reference Manual for details. ■τQEMM and Bus-Mastering Devices Certain SCSI disk controller cards (and, less frequently, ESDI disk controllers and network cards) use a technique called bus-mastering to speed up disk access. This technique can cause a conflicts when memory managers attempt to load a device driver or TSR into upper memory. QEMM automatically support bus-mastering disk controllers. In most cases, QEMM can detect a bus-mastering hard disk controller and will take steps to prevent problems. (This is not true if the card controls something other than a hard drive or if QEMM is not being loaded from the bus-mastering hard drive.) ■τQEMM and Bus-Mastering Devices (Continued) Please refer to BUS-MAST.TEC. You can use QSETUP to view this technotes; from the main menu choose "View QEMM hints, technotes and READ.ME," then "View QEMM technical notes." ■τQEMM and the EMS Page Frame Most programs that use expanded memory (EMS) access up to 64K of expanded memory at a time (in 16K units called pages) at a special area of upper memory called the page frame. An expanded memory manager (QEMM) makes memory from outside the first megabyte of memory appear in the page frame. QEMM's installation normally reserves 64K of upper memory for use as a page frame. You can use QSETUP to specify that no page frame should be used; however, we strongly recommend that you do NOT do this. See the technote FRAME.TEC. You can use QSETUP to view this technote; from the main menu choose "View QEMM hints, technotes and READ.ME," then "View QEMM technical notes." Press PgDn to see a list of applications that use EMS. ■τApplications that use EMS ■τProduct Publisher Paradox Borland Clipper Computer Associates DESQview Quarterdeck Folio Views Folio Corp. Generic CAD AutoDesk Lotus 1-2-3 2.x Lotus Lotus Agenda Lotus FoxPro Microsoft Quattro Pro Borland Wildcat BBS Mustang ■τApplications that use EMS (Continued) ■τ Product Publisher Turbo C Borland DESQview/X Quarterdeck Intellicom Liberation Enterprises Geoworks Geoworks Lotus Magellan Lotus Lotus Symphony Lotus PC-Write Quicksoft Q & A Symantec WordPerfect 5.x and 6.x WordPerfect Corp. Harvard Graphics SPC dBASE Borland ■τ Network Programs that use EMS ■τ Product Publisher 3COM TCPIP 2.1 3COM DECNET Digital Equipment Corp. PC/TCP 2 and 3 FTP LANMAN 2.1 Microsoft EMSNETX.COM and VLM.COM Novell ■τUtility Programs and Drivers that use EMS ■τProduct Publisher PC Tools Symantec DoubleDisk Vertisoft Fastback Symantec NDOS Symantec Btrieve Novell QRAM Quarterdeck Stacker Stac Electronics MSCDEX CD ROM Driver Microsoft Xtradrive Integrated Information Technologies ■τDisk Caches that can use EMS ■τProduct Publisher Norton cache Symantec Cache86 Aldridge PC-Kwik PC-Kwik Hyperdisk Hyperware ■τGames that use EMS ■τProduct Publisher Falcon Spectrum Holobyte Patriot Three-Sixty Spear of Destiny ID Software Strike Commander Origin Ultima Underworld Origin V for Victory Three-Sixty Wing Commander Origin Wolfenstein ID Software X-Wing LucasArts Flight Simulator 5 Microsoft ■τQEMM's Stealth ROM Feature Stealth ROM is an exclusive QEMM feature that can typically create an additional 48K to 115K of High RAM on almost any PC. Stealth ROM hides your PC's ROMs and makes their memory addresses available for High RAM or expanded memory mapping. The advantage of having the additional High RAM is that QEMM can load TSRs, device drivers and selected parts of DOS there instead of in conventional memory. By freeing up conventional memory, you will have more room for running DOS programs. Depending on your configuration and the installation options you chose, Stealth ROM may have been enabled on your system when you installed QEMM. When you run the Optimize program, Optimize will ■τQEMM's Stealth ROM Feature (Continued) try to load your TSRs, device drivers and selected parts of DOS into High RAM. If all of them will not fit, Optimize will test your system for compatibility with Stealth ROM and will determine which Stealth ROM method is best for your system. For more information on Stealth ROM, see STLTECH.TEC in your QEMM\TECHNOTE directory. In the unlikely event that you are having trouble that you think is related to Stealth, see TROUBLE.TEC or STEALTH.TEC. You can use QSETUP to view these technotes; from the main menu choose "View QEMM hints, technotes and READ.ME," then "View QEMM technical notes." ■τQEMM's Optimize Program Optimize is a program that determines how to load TSRs, device drivers and selected parts of DOS into upper memory. Optimize analyzes the memory requirements of device drivers and TSRs that you are loading from CONFIG.SYS and AUTOEXEC.BAT and any batch files called by AUTOEXEC.BAT. Then, Optimize determines the most efficient way to load items into High RAM by testing all possible locations. There can be thousands or millions of possibilities. The object is to free up as much conventional memory as possible for your DOS programs. If you are using QEMM's DOS-Up feature, Optimize also experiments with different ways of loading parts of DOS into upper memory. ■τQEMM's Optimize Program (Continued) When you install QEMM, INSTALL offers to run Optimize. You should run Optimize again if you add new hardware devices or modify your AUTOEXEC.BAT or CONFIG.SYS files. Optimize must reboot your machine two or more times to complete its testing. Optimize changes the lines that load device drivers and TSRs by adding a LOADHI command to the beginning of those lines. For example, a device driver line that looks like this: ■ΦDEVICE=C:\DOS\SETVER.EXE would look something like this after Optimize has done its work: ■τQEMM's Optimize Program (Continued) ■ΦDEVICE=C:\QEMM\LOADHI.SYS /R:1 C:\DOS\SETVER.EXE A TSR line in AUTOEXEC.BAT that looks like this: ■ΦC:\DOS\SMARTDRV.EXE would look something like this after running Optimize: ■ΦC:\QEMM\LOADHI /R:2 C:\DOS\SMARTDRV.EXE For detailed information on Optimize, see Chapter 3 of the QEMM Reference Manual. For information on the LOADHI command, see Chapter 8. ■τUndoing an Optimize When you run QEMM's Optimize program, modifications are made to your CONFIG.SYS and AUTOEXEC.BAT files and any batch file called by AUTOEXEC.BAT. If for some reason you want to restore these files to their pre-optimized states, type UNOPT at the DOS prompt. The files will be restored to the state they were in before you last ran Optimize. To see a list of the nine most recent configurations that have been modified by QEMM programs, type OPTIMIZE /RESTORE at the DOS prompt. You can then select the configuration you would like Optimize to restore. In addition to the nine most recent configurations, the list contains the configuration that existed at the time you installed QEMM 7.5. ■τThe Manifest Program Manifest is a powerful system reporting program that is automatically installed on your hard drive when you install QEMM. While Manifest can be extremely useful when troubleshooting a problem, it is much more than a diagnostic tool. Whether you are new to computers or a power user with years of DOS experience under your belt, Manifest will help you take full advantage of the memory that is installed in your computer. To run Manifest, just type MFT at the DOS prompt. At your own pace explore the world of memory as it relates to your own PC. Press F1 anytime for context-sensitive online help. ■τVIDRAM - Extending Memory for Text-based Programs QEMM's VIDRAM program can extend conventional memory by as much as 96K for running DOS text-based programs. VIDRAM even extends conventional memory for DOS text programs running in Microsoft Windows. To use VIDRAM, your system must have an EGA or VGA video adapter or an adapter with EGA or VGA capability (this includes VGA- compatible 8514A video adapters). Your PC must have 640K of conventional memory and the programs that you run while using VIDRAM must not use EGA or VGA graphics. ■τVIDRAM - Extending Memory for Text-based Programs (Continued) If your PC has an EGA or VGA video adapter, the 64K memory area just above conventional memory (640K-704K or A000-AFFF hex) is reserved for use by graphics modes. When you run text-based programs, that area is unused, so VIDRAM can appropriate it to extend the contiguous conventional memory for running programs. It is important to understand that you cannot run EGA or VGA graphics operations while VIDRAM is in use. If you routinely use both large text-based programs and graphics programs, you can turn the VIDRAM feature on when you need it for a text program and off before you run a graphics program. If you are using an 8514A adapter, you can still use 8514 graphics programs while VIDRAM is enabled. ■τVIDRAM - Extending Memory for Text-based Programs (Continued) To turn VIDRAM on type VIDRAM ON at the DOS prompt. This command will extend conventional memory into the EGA/VGA graphics area for a total of 704K conventional memory. To turn VIDRAM off so you can use graphics programs again, type VIDRAM OFF. For more information on VIDRAM, including using VIDRAM with Microsoft Windows, DESQview, and DESQview/X, and extending conventional memory an additional 32K, see Chapter 6 of the QEMM Reference Manual. ■τTips on Freeing Up More Conventional Memory If you use DOS text-based programs, you can extend conventional memory by as much as 96K by using QEMM's VIDRAM feature. For information on VIDRAM, see Chapter 6 of the QEMM Reference Manual. The Manifest program may be able to tell you how to free up a bit more conventional memory. Run Manifest by typing MFT at the DOS prompt. When Manifest displays, type H to select Hints, and read the suggestions Manifest offers. If you do not use any programs that require DPMI (DOS Protected Mode Interface) memory, you can free up 1-2K by deleting the QDPMI.SYS device driver line from your CONFIG.SYS file. ■τQEMM's New Parameter Names If you have upgraded from QEMM 6 or earlier, be aware that many of the old parameters have new names. You can still use the older parameter names if you like. Below is a list of the old parameter names, cross-referenced with the parameters' new names. Some parameters have abbreviations which are listed in parentheses. ■τOld Name New Name COMPAQ386S (C386S) COMPAQ386S:Y (C386S) COMPAQEGAROM (CER) COMPAQEGAROM:Y (CER) COMPAQHALFROM (CHR) COMPAQHALFROM:Y (CHR) COMPAQROMMEMORY (CRM) COMPAQROMMEMORY:Y (CRM) ■τQEMM's New Parameter Names (Continued) ■τOld Name New Name DONTUSEXMS (DUX) USEXMS:N DOS4 (D4) DOS4:Y (D4) FORCEEMS (FEMS) FORCEEMS:Y (FEMS) FORCESTEALTHCOPY (FSTC) FORCESTEALTHCOPY:Y (FSTC) IGNOREA20 (IA) TRAP8042:Y (T8) (default has changed) LOCKDMA (LD) LOCKDMA:Y (LD) NOCOMPAQFEATURES (NCF) COMPAQFEATURES:N (CF) NOEMS EMS:N NOFILL (NO) FILL:N NOHMA HMA:N ■τQEMM's New Parameter Names (Continued) ■τOld Name New Name NOPAUSEONERROR (NOPE) PAUSEONERROR:Y (PE) NOROM (NR) MAPREBOOT:N (MR) NOROMHOLES (NRH) ROMHOLES:N (RH) NOSHADOWRAM (NOSH) SHADOWRAM:NONE (SH) NOTOKENRING (NTR) TOKENRING:N (TR) NOTOPMEMORY (NT) TOPMEMORY:N (TM) NOVDS VDS:N NOVIDEOFILL (NV) VIDEOFILL:N (VF) NOVIDEORAM (NVR) VIDEORAM:N (VR) ■τQEMM's New Parameter Names (Continued) ■τOld Name New Name NOWINDOWS3 (NW3) WINDOWS3:N (W3) NOXBDA (NX) XBDA:N NOXMS XMS:N OLDDV (ODV) OLDDV:Y (ODV) UNUSUALEXT (UX) UNUSUALEXT:Y (UX) ■τBooting without QEMM If you want to boot your PC without QEMM's memory management, first reset your system. Use the power switch if necessary. When you hear a beep, hold down the Alt key until the boot sequence stops. If you are using QEMM's DOS-Up feature, you will see a message asking if you want to unload the DOSDATA device driver; press Esc to unload it, then ■Φimmediately ■µ press and hold down Alt again until you see: "QEMM: Press ESC to unload QEMM or any other key to continue with QEMM." Press the Esc key. QEMM will not load, so programs will not load into High RAM, but your system will be usable. ■τContacting Quarterdeck Technical Support As a registered owner of QEMM, your package includes 90 days of prepaid technical support. You can receive support by dialing our 1-800-ROBOTECH system, fax, mail, or phone. If you have a modem, you can get support through Quarterdeck's CompuServe forum (see the Passport brochure included in your package for FREE subscription information), or through several other public message forums. Your prepaid support starts with your first call, letter, fax, or online communication in reference to QEMM. Before contacting technical support, we encourage you to see Appendix A of the QEMM Reference Manual for troubleshooting information, and Appendix B for a list of technical bulletins (technotes) included with QEMM. You can view technotes with QEMM ■τContacting Quarterdeck Technical Support (Continued) Setup by selecting the technotes option at the main menu. The troubleshooting guide and the technotes give step-by-step solutions to several common problems users may experience after installing QEMM. Also, be sure to see the file READ.ME in the \QEMM directory for late-breaking information. You can also view the READ.ME file with QEMM Setup by selecting the technotes option at the main menu. For information on contacting technical support see the Passport brochure included with QEMM or read the text file CONTACT.TEC located in the \QEMM\TECHNOTE directory. To read that file, view it in a text editor such as EDIT, provided with DOS 5 and 6, or ■τContacting Quarterdeck Technical Support (Continued) load it into your word processor as an ASCII file. Quarterdeck also offers a VIP Maintenance and Support Plan. See the Passport brochure for information. ■τSwitching Between MS-DOS 6's Memory Manager and QEMM QEMM provides all the functionality of MS-DOS 6's memory manager, and much more. For a list of QEMM's features and how they stack up against DOS 6's memory manager, see "QEMM Benefits and Features" in Chapter 1 of the QEMM Reference Manual. If you are using MS-DOS 6 and you have run its MemMaker memory utility, you can switch back to QEMM by running QEMM's Optimize program (assuming you have already installed QEMM on your hard disk). To run Optimize, type OPTIMIZE at the DOS prompt. If you ever want to switch back to MS-DOS's memory manager, simply run MemMaker again. If you are using QEMM's DOS-Up feature, be sure to run QSETUP and disable DOS-Up before you run MemMaker. ■τSwitching Between MS-DOS 6's Memory Manager and QEMM (Continued) If you are using QEMM's Stealth D*Space feature and you decide to switch back to MS-DOS 6's memory manager, the ST-DSPC.SYS driver will perform the same function as DOS's DBLSPACE.SYS /MOVE or DRVSPACE.SYS /MOVE. That is, it will allow DBLSPACE.BIN or DRVSPACE.BIN to be moved into upper memory. You can replace ST-DSPC.SYS with DBLSPACE.SYS or DRVSPACE.SYS, but you will suffer no ill effects if you do not. ■τQEMM Technote Index You can view the following technotes, in the \QEMM\TECHNOTE directory, by pressing the corresponding number: 1 = Product Compatibility Information 1»TECHNOTE\PRODUCTS.TEC 2 = An Overview of QEMM's StealthROM Technology 2»TECHNOTE\STLTECH.TEC 3 = QEMM Programming Interface 3»TECHNOTE\QPI.TEC 4 = QEMM General Troubleshooting 4»TECHNOTE\TROUBLE.TEC 5 = Exception Reports Explained 5»TECHNOTE\EXCEPT13.TEC 6 = Stealth Troubleshooting 6»TECHNOTE\STEALTH.TEC 7 = Maximizing Memory with PCMCIA 7»TECHNOTE\PCMCIA.TEC ■Φ--- Type the number of the item you want --- ■ΦPress PgDn for more ■τQEMM Technote Index (Continued) 1 = Why the EMS Page Frame is Important 1»TECHNOTE\FRAME.TEC 2 = QEMM Analysis for Solving Memory Conflicts 2»TECHNOTE\EXCLUDE.TEC 3 = Exception Reports Explained 3»TECHNOTE\EXCEPT13.TEC 4 = Troubleshooing Exception Reports 4»TECHNOTE\EX13FLOW.TEC 5 = QEMM's XSTI Stealth ROM Parameter 5»TECHNOTE\XSTI.TEC 6 = QEMM Utility Programs 6»TECHNOTE\QEMMUTIL.TEC 7 = QEMM's EMS and XMS Test Programs 7»TECHNOTE\TESTPRGS.TEC 8 = Bus-Mastering Devices and QEMM 8»TECHNOTE\BUS-MAST.TEC 9 = How QEMM Modifies your System at Installation 9»TECHNOTE\INSTALL.TEC ■Φ--- Type the number of the item you want --- ■ΦPress PgDn or PgUp for more ■τQEMM Technote Index (Continued) 1 = QEMM Programming Interface 1»TECHNOTE\QPI.TEC 2 = Maximizing Conventional Memory 2»TECHNOTE\MAXMEM.TEC 3 = QEMM with Novell DOS and DR-DOS. 3»TECHNOTE\NW&DRDOS.TEC 4 = Windows 3.1 and QEMM Advanced Troubleshooting 4»TECHNOTE\WINFLOW.TEC 5 = Parity Errors 5»TECHNOTE\PARITY.TEC 6 = QEMM with MS-DOS 5 6»TECHNOTE\DOS5.TEC 7 = QEMM with MS-DOS 6 7»TECHNOTE\MSDOS6.TEC 8 = QEMM with Novell DOS and DR-DOS 8»TECHNOTE\NW&DRDOS.TEC 9 = QEMM and Games 9»TECHNOTE\GAMES.TEC ■Φ--- Type the number of the item you want --- ■ΦPress PgDn or PgUp for more ■τQEMM Technote Index (Continued) 1 = QEMM and Stacker 1»TECHNOTE\STACKER.TEC 2 = QEMM and SuperStor 2»TECHNOTE\SSTOR.TEC 3 = QEMM and XtraDrive 3»TECHNOTE\XTRADRV.TEC 4 = QEMM and Windows 95 4»TECHNOTE\W95-QEMM.TEC 5 = Contacting Quarterdeck 5»TECHNOTE\CONTACT.TEC ■Φ--- Type the number of the item you want --- ■ΦPress PgUp for more